January 25, 2020

How to Solve Canon Printer Error C000?

Canon Printer Error C000, one of the most irritating errors since the inhibition of the scope of functions of the Canon average device, means that an internal error with the Canon system has occurred. Various solutions are available to repair the Canon Printer Error Code C000.

Canon Error Code C000 is a general error message that occurs primarily in a wide variety of Canon manufactured printers. Mainly to the Canon PIXMA Printer series. Essentially C000 error arises because of an internal problem that prevents the machine from its normal operation.


Canon Printer Error C000

Because of an internal reason the error occurs, but still, the reason is not glass clear. Error C000 is an alert that occurs primarily to the Canon devices, especially the Canon PIXMA Printer series and other multifunctional devices.

Procedure to Fix Canon Error Code C000 on Canon PIXMA Series Printers

Check out the effective methods from the below lines to know them of how to solve Canon error code C000. As the correct reason is not known behind the error so you may need to try several methods as given below:

Fix 1: Ensure the No Presence of the Packing Materials

The error C000 code is sometimes caused by unremoved packaging materials. So as the device arrived, make sure after opening the printer door, you have removed all the packaging materials. 

The packaging materials which should be removed are protective tape as well as protective polystyrene. Check if the problem still exists or not after doing so.

Fix 2: Re-Install the Ink Cartridges

Another reason for the error is improperly seated or unseated ink tanks. Confirm that all ink tanks are properly fixed at their assigned locations to fix the mistake. To do this, open the printer door and evenly check all the ink tanks and properly reseed them to their correct locations. This fix will work if the cause of the error C000 is due to an improper installation of the ink cartridges.

Fix 3: Verify the Ink Cartridges Level

Empty Ink cartridges are also returned to the Canon printer error C000. So, to fix this open the Canon device and then check all the ink cartridges one by one. Look at the ink contains in the tank. If any of them are zero, remove them and install a new cartridge. After that, check whether or not the issue is resolved.

Fix 4: Clean the Overall Printer Components

The presence of dust particles on the printer components is not good, this is one of the general reasons responsible for the error code C000. If this is the case, then try the following steps:

  1. At first, turn on the printer and then open the top cover. This will travel the ink cartridges to your accessible location.
  2. Remove the ink cartridges one-by-one as arranged from the left-hand side.
  3. Next, detach the printer from the power source.
  4. Further, remove all the removable parts. The print head, paper tray.
  5. Wipe the printer components with the help of the soft cloth and also check if any paper is stuck to the printer.
  6. After removing the dust on the printer assemble back the printer to the normal look.
  7. Restart the printer and hopefully, you will find the issue gets resolved.

Fix 5: Reset the Canon Printer

If all the above solutions do not work, then the Canon system resetting may be an effective solution for troubleshooting the C000 error code. Canon machine resetting isn’t a knotty process. 

Only Power off the Canon device and remove all the power cords that are connected to the printer and wait about 5 minutes. Re-plug all power cords back after 5 minutes and then turn on the printer. Lastly, check if you still face the C000 error or not.

If, even after following the above steps, the issue still persists, please dial up our Canon Printer Support Number for instant support.

Leave a Reply

Your email address will not be published. Required fields are marked *