How to Connect Canon Printer to WiFi?

Have you got a Canon printer? And already have installed the device at your home or office? If Yes, then the next step to follow is, connecting the Canon device to the wireless network. The steps to follow to perform this process is very simple, if and only it is known to you. From the below lines you can learn the “how to connect Canon printer to WiFi” process completely. So, check out the steps below.

How To Connect Canon Printer To WiFi

Steps to Connect the Canon Printer to a WiFi Network

After installing the Canon printer to a location, which is near to both the computer and the internet device, now the step is to connect the Canon printer to WiFi. Follow the lines below to learn the process.

First Step: Connect the Canon Printer to a WiFi Network

  1. At first, activate the power supply for the printer and the co-related devices.
  2. Next, tap the Power icon button of the printer to turn the device ON.
  3. After that, press the Settings button and then with the help of the navigation arrow keys get the Device Settings option.
  4. Select OK to continue.
  5. Again, with the help of the arrow keys navigate to the Wireless LAN setup option and then press on OK. This will start searching for the nearby available networks and makes a list.
  6. From the available network list, select your internet connection and then tap on OK.
  7. Further, enter the network password to complete the process.

After the Printer control panel shows you that the connection is successfully done, now proceed further to connect the printer to the computer, from which you can print a document wirelessly.

Second Step (One of Two): Connect the Printer Wirelessly to Windows 10

  1. Press down the Windows button along with the letter I to open the Settings window.
  2. Next, click on Devices from the listed options.
  3. Now, from the left-hand side panel click on Printers and Scanners.
  4. Further, click on the Add a Printer tab.
  5. Wait, until the Windows locate your Canon printer and add it to your PC.

That’s all. However, if you are a Mac user then the process will be slightly different, you can learn it from the further section. So, if you are a Mac user then read out the below lines to learn the process.

Second Step (Two of Two): Connect the Printer Wirelessly On Mac

  1. Click on the Apple icon, that is present at the top left-hand side of the screen.
  2. Now, click on System Preferences.
  3. Further, select Printers and Scanners.
  4. After that, click on the Add symbol and then wait until your Mac device gets the Canon printer on the screen.
  5. Select the Canon device to complete how to connect Canon printer to WiFi process.

Solve the Printer Model Canon MX922 Support Code 1403 with Effective Steps

Canon is known over the years to produce high-performance and high-quality printers. The Canon MX922 is one of such devices. Because of the range of its features, the users usually prefer the Canon printers over the others.

After long use of the Canon printer, the users have faced some common problems, Canon MX922 support code 1403 is one of them. It can be resolved easily by the applications of the proper methods.

Canon mx922 Support Code 1403

The Canon error code 1403 indicates the print head related issues. You can read further lines to know the effective ways of how to solve Canon error code 1403.

Effective Workarounds to Solve Canon MX922 Support Code 1403

Learn the workarounds from the below lines to solve the Canon MX922 error code 1403 efficiently.

Work 1: Clean the Print Head and Remove the Damaged Cartridges

The first solution steps that you need to apply to solve the error code 1403 from the Canon printer is, remove the dirt particles from the printer components.

First of all, turn on the printer and then open the printer cover. Wait until the carriage moves to the accessible location. Uninstall the ink cartridges. Further, remove the print head after disconnecting from the power source. After that, first, wipe the printer components with the help of the dry cloth and then if any ink marks are present on the print head then remove those marks using an alcoholic solution dipped cloth.

Once, the printer components get clean assemble the printer back to the normal state. Before installing the ink cartridges check the ink level. If you find anything wrong with any of the cartridge then replace that with a new one. After installing the ink cartridges close the printer door.

Now, try to print a document via the Canon MX922 printer and check whether the problem gets resolved or not. And if not, then try the further solution.

Work 2: Follow the Manual to Assemble the Printer

If you have not assembled the printer correctly then the error may occur. If this is the case, then read the manual that is present in the printer box to know the correct locations of the printer parts. Hopefully, after assembling the printer properly you can fix the matter.

After trying both the above workarounds, if still, the Canon MX922 support code 1403 exists then you can contact the technicians by dialing us on our Canon Customer Support Number. It is active 24 hours a day to help you with the Canon error code solutions.

Effective Methods to Solve Canon Support Code 6000: The Printer Error

We cannot deny the fact that today for most of our jobs we are all relying on computers and printers. May it be our personal or professional life, the electronic devices take a vital part. It’s no longer tiring to get a hard copy of a file, all you need to do is click a button.

Along with the advantages, electronic devices may face a few problems over time with continuous usage. The best thing about the gadgets is that they flash a basic error code that helps to identify the real reason for the problem, making it easy to solve them.

Today we’re going to look at one of those canon printer error codes, which is Canon support code 6000. And if you face any problems or have any doubts or questions while following the steps provided here, you can contact our Canon Printer Customer Support.

Canon Support Code 6000

Our highly qualified experts are available 24 hours a day to troubleshoot and resolve the errors in your Canon printer. They check the timing sensor unit, the logic board, the paper feed motor, the feed roller, etc.

Reasons of Why the Canon Support Code 6000 Occurs

The blinking of the error 6000 may not be something we want while printing an important document. But the Canon support code 6000 is a well-known error. Several factors that cause this error. Some of are listed below:

  • Presence of paper particles or dust on the feed tray.
  • Improper feed tray installation is another fact responsible for the error code 6000 on Canon.
  • Running a count of printings at a time.
  • Smearing and scratching of the line feed.
  • Error in the in-line slit or the sensor unit.

Tips to Solve the Canon Printer Error Code 6000

Canon support code 6000 can be solved easily by utilizing the following solutions:

Solve the Physical Glitches

Any particle stuck on the printer components is a factor responsible for the Canon error code 6000. So, first, turn on the printer and then open the top cover of the device. Next, wait until the carriage travels to the access point. Remove the ink cartridges and then take out the print head. Now, by utilizing a soft cloth wipe the dirty parts of the printer to turn them clean. Also, utilize an alcohol solution to remove the ink marks on the printer.

After removing the dust reassemble the printer. Install the ink cartridges to their assigned slots and following the way that is explained in the manual that comes with the cartridges pack. Lastly, close the cover of the printer.

Now, try to use the Canon device to check if the error code gets resolved or not. And if still, the error code exists then try the further solution.

Reset the Canon Printer

Printer reset is one of the good ways to solve the common Canon printer errors, and also useful to fix Canon support code 6000. However, sometimes only by restarting the printer, the issue gets resolved.

The effective printer restart steps to solve the Canon error are as follows:

  1. At first, turn off the printer and then stop the power supply.
  2. Next, unplug the cables of the printer and wait till the time the printer gets down to the normal temperature.
  3. Further, plug in all the cables back to the printer and then active the device back.
  4. Now, pressing down the Power button of the printer, tap the Stop button twice. Repeat this step two to three times. 
  5. After that, remove your fingers from both the buttons. 
  6. Again, press the Stop button four times to complete the process. 
  7. Lastly, run a printing task and then check the device status. 

Hopefully, this time you will flawlessly print a document without getting the Canon support code 6000.

How to Solve Canon Printer Error C000?

Canon Printer Error C000, one of the most irritating errors since the inhibition of the scope of functions of the Canon average device, means that an internal error with the Canon system has occurred. Various solutions are available to repair the Canon Printer Error Code C000.

Canon Error Code C000 is a general error message that occurs primarily in a wide variety of Canon manufactured printers. Mainly to the Canon PIXMA Printer series. Essentially C000 error arises because of an internal problem that prevents the machine from its normal operation.


Canon Printer Error C000

Because of an internal reason the error occurs, but still, the reason is not glass clear. Error C000 is an alert that occurs primarily to the Canon devices, especially the Canon PIXMA Printer series and other multifunctional devices.

Procedure to Fix Canon Error Code C000 on Canon PIXMA Series Printers

Check out the effective methods from the below lines to know them of how to solve Canon error code C000. As the correct reason is not known behind the error so you may need to try several methods as given below:

Fix 1: Ensure the No Presence of the Packing Materials

The error C000 code is sometimes caused by unremoved packaging materials. So as the device arrived, make sure after opening the printer door, you have removed all the packaging materials. 

The packaging materials which should be removed are protective tape as well as protective polystyrene. Check if the problem still exists or not after doing so.

Fix 2: Re-Install the Ink Cartridges

Another reason for the error is improperly seated or unseated ink tanks. Confirm that all ink tanks are properly fixed at their assigned locations to fix the mistake. To do this, open the printer door and evenly check all the ink tanks and properly reseed them to their correct locations. This fix will work if the cause of the error C000 is due to an improper installation of the ink cartridges.

Fix 3: Verify the Ink Cartridges Level

Empty Ink cartridges are also returned to the Canon printer error C000. So, to fix this open the Canon device and then check all the ink cartridges one by one. Look at the ink contains in the tank. If any of them are zero, remove them and install a new cartridge. After that, check whether or not the issue is resolved.

Fix 4: Clean the Overall Printer Components

The presence of dust particles on the printer components is not good, this is one of the general reasons responsible for the error code C000. If this is the case, then try the following steps:

  1. At first, turn on the printer and then open the top cover. This will travel the ink cartridges to your accessible location.
  2. Remove the ink cartridges one-by-one as arranged from the left-hand side.
  3. Next, detach the printer from the power source.
  4. Further, remove all the removable parts. The print head, paper tray.
  5. Wipe the printer components with the help of the soft cloth and also check if any paper is stuck to the printer.
  6. After removing the dust on the printer assemble back the printer to the normal look.
  7. Restart the printer and hopefully, you will find the issue gets resolved.

Fix 5: Reset the Canon Printer

If all the above solutions do not work, then the Canon system resetting may be an effective solution for troubleshooting the C000 error code. Canon machine resetting isn’t a knotty process. 

Only Power off the Canon device and remove all the power cords that are connected to the printer and wait about 5 minutes. Re-plug all power cords back after 5 minutes and then turn on the printer. Lastly, check if you still face the C000 error or not.

If, even after following the above steps, the issue still persists, please dial up our Canon Printer Support Number for instant support.

Method to Setup Canon Printer via Simple Steps

Canon printer installation is a vital part to set up the device successfully. If you are looking for how to setup Canon printer at your home or at the office then check out this article till to the end. From this article, you can learn the complete steps of the Canon printer setup process.


Setup Canon Printer

The important criteria to look after while installing the printer is that the printer is located near to the computer and the WiFi device. After installing the printer to a suitable location now proceed further to end the Canon printer setup process.

Using the instructions booklet given in the printer box that you buy, you can properly set up a printer. Unbox the printer and then plug the power cord. Next, turn on your computer after inserting the cartridge, and don’t forget to check the alignment tab. Now, connect the print to PCs using LAN or Wi-Fi. And if you can’t do that, contact tech experts to get online help in setting up the Canon printers properly.

Steps to Setup a Canon Wireless Printer

With the one-touch simplicity and creative design blend, the new Canon printers are ideal for home or office work. These have multiple features such as one-touch solution buttons, quiet mode, on-demand repair software, wired or wireless LAN access, and minimal maintenance.

To repair any tech glitches inside your Canon printers, you can talk to our Canon Support’s technical team. They will inform you of the techniques of installing a Canon MF4720W Wi-Fi gadget over the Wi-Fi connection and Canon MF4700 over the wireless network.

Setup Canon Printer on Mac

If you have a query or are confused regarding setting up the Canon Printer on Mac OS. Contact our Canon Printer Technical Support Number for remote online access. Get your Canon Printer setup problems solved by contacting qualified technicians. Trained techies help with security issues in your system and keep data secure by solving printer errors.

Procedure to Connect Printer to Mac

Here, you will get the instructions for using Canon Printer networked. If you’re not sure about the printer’s name, you’d like to add the printer label scan. Check out the manual. Due to the technical based context, you can’t follow the instruction lines and thus you can connect to the professional to attach network printer to Mac OS via online remote. 

Upgrade the printer software on your used Mac or ask for support from the qualified network administrator. We cover the instructions for using Canon Printer networked.

Procedure to Connect WiFi Enabled Printer to MacBook Air, MacBook Pro

Read the documented letter that comes with the printer or talk with the experts to connect MacBook Air’s Network Printer, MacBook Pro for the machine to run successfully. Some adjustments need to be made at your end after buying the printer to get the quality print. After the qualified technicians work for you on your machine, it may be hard for the different versions of the Mac to obtain the value print.

How to Connect the Canon Wireless Printer to my WiFi Network?

Configuring the printer requires the basic technical ideas and expertise, as you have to follow different processes for different types of printers. You need to adopt a different methodology for Canon and Network printers and implement the correct appropriate method. 

Configuration involves your computer’s printer choice, orientation configuration, and network connection with various computers. 

User-friendly steps to connect the Canon Wireless printer to a WiFi network are as follows:

  1. At first, turn on the printer after enabling the power source to the device.
  2. Tap the Settings key and then by utilizing the arrow keys navigate to Device Configurations.
  3. Click on OK to continue.
  4. Further, using the arrow keys navigate to LAN Settings and then click on OK.
  5. Now, move to the wireless LAN setup option and click on OK. This will start searching the nearby internet connection and make a list to your device control panel.
  6. Select your network from the available list and then input the password of your network to complete the process.

Virtual Support for Canon Printer Setup

Printer brands are different from each other, and each printer’s specification is unlike any other. Installation of the printer driver and rightly configure Canon printer are the main factors making a printer useful to consumers. If you are facing a Canon printer setup issue when setting up a printer, our Online Tech Support is available for users to complete the print setup process as needed.

Steps to Canon mg2900 Setup: Full Printer Setup

Canon Pixma mg2900 wireless printer setup is an important process that every user needs to go through after buying or getting the device. If you have searched several sources and still are in confusion with the Canon mg2900 setup process then hopefully, this article will clear your doubts.

Canon mg2900 Setup

There are several criteria the users need to complete before proceeding with the setup process.

Always install the printer in such a location that is saved from the physical disturbances. Also, a less temperature place is recommended, so that ink of the ink cartridges does not get dry. Always, install the printer near to both the network and the computer device, so that, no signal issue takes place.

After you have installed the printer successfully at your home or office, now proceed with the below steps to complete the Canon printer setup process.

Complete Steps to Setup the Canon mg2900 Wireless Printer

Utilize the below steps to set up the Canon mg2900 printer successfully:

Canon mg2900 Setup via Standard WPS

After connecting the printer, the computer, and the network device to the power source activate the supply. Next, press the power button of the computer and the printer. Wait until the computer and the printer turn on and the lights of the network device get stable. Proceed with the further steps to complete the Canon mg2900 setup process.

  1. After ensuring the printer is on, locate the Wi-Fi button on the printer’s body.
  2. Press down the WiFi button and keep it held until the light flashes on the printer.
  3. Now, press the WPS button of the router, and wait, until the printer control panel shows the network option under the list.
  4. Note: If the orange light blinks during the process, that means the distance of the router is not in range. You can proceed with the Troubleshooting in this case.
  5. Select your network and then enter the password.
  6. Click on OK to confirm.
  7. Now, ensure that the WiFi signal and the Power signal of the printer is ON. This indicates that the wireless connection of the printer is successfully done.

Steps to Connect the Canon Printer with your Device

After connecting the printer to the internet, the next step is, connect the printer to the device, from which you want to print the document.

To connect the Canon printer to the Windows OS, insert the printer installation disk. 

However, if you are using Mac OS and want to connect the printer, in that case, you need to download the software of the printer from the Apple website or the Canon Official site. Next, open the file to proceed with further steps.

After inserting the disk to the computer the Windows users need to select the region and language or there are other options as well. After entering the correct answer click on Next to continue.

Whereas, the Mac users directly get the Install helper option window. 

Click on Next to the Install helper window. This step is applicable to both Windows and Mac users.

Further, click on Next and then choose the Network section, select Cableless setup. Now, proceed with the on-screen instructions and complete by accepting the License Agreement. Click on Finish.

Solve Canon Support Code 1688 with the Expert’s Solutions

Canon is a well-named manufacturer of the printer device and the according components. If you are facing the Canon Support Code 1688 and wondering what it is and how to fix it, then you are on the right path. 

Canon Support Code 1688

Error code 1688 indicates an issue with the cartridge component of the printer. If the ink in the cartridges is low or run out, then this error code appears. This error can easily be solved by the proper methods. You can learn them by studying further. So, check them out.

Actions to Solve Canon Printer Error 1688

There are a few effective solutions to fix the Canon support code 1688. You can learn them efficiently from the below lines:

Solution 1: Manually Resetting the Ink Level

The steps to manually reset the ink level are as follows:

  1. At first, open the Control Panel window. For it, tap down the Windows button along with the letter R first. After that, type control in the Run bar and then click on OK.
  2. Navigate to Devices and Printers. If the View by of the Control Panel is set as Category then click on Hardware and Sound first and then click on Devices and Printers.
  3. Now, right-click on your Canon printer that you will get under the Printers and Faxes section, and then click on Printing Preferences.
  4. Further, go to the Maintenance Program and navigate to the Ink Level warning indicator and turn the indicator off by moving the radio button in the opposite direction.
  5. Click on Apply to save the changes.

Solution 2: Utilize Stop/ Reset/ Resume Button

If the ink cartridge of the printer is running a low ink condition and you need an urgent document to print, then this method will useful for you. The steps to follow to perform this method are as below:

Press and hold the Stop/ Reset/ Resume button for five seconds. After that, leave the button. Hopefully, now you are enabled to print a document in the low ink condition.

Try both the solutions one-by-one. Hopefully, the application of the methods will help you to get a positive result.

Guide to Solve the Canon mg3022 Offline Error

Canon is a high-lighted name in terms of the printer and the co-related gadgets. If the Canon mg3022 offline error occurs, then to solve the matter a few effective solutions are available. To know them you can proceed further. Here, you will learn the solutions along with the steps.

Canon mg3022 Offline

First, know the causes of the offline error on the Canon printer. A simple misconfiguration of the printer is responsible for the error message. Mostly, after a system update, the users are facing the error. If you want to learn how to fix the Windows 10 Printers offline error, then reading this article will also get you a positive result to solve the matter.

How to Deal with the Canon mg3022 Printer Offline Error Windows 10?

Printer PIXMA Offline status error is a very common problem that is faced by almost every user. If you are a new visitor of this error or an older user of Canon printer, then check out the below lines, to learn the effective solutions of the error.

Solution 1: Restart the Print Spooler Service

Restarting the Print Spooler service is one of the useful ways to fix the Canon mg3022 offline status error. The steps to allow you to perform this solution is very simple, you can learn it from the below lines. So, carefully check out the lines first and then try the steps.

Canon mg3022 Offline


  1. First of all, activate the Windows search bar. Tap down the Windows button for it.
  2. After that, in the search bar type services and hit on the Services option from the searched results.
  3. Now, locate the Print Spooler option under the Services window and right-click on it.
  4. Next, choose the Restart item under the menu.
  5. Further, right-click on the Print Spooler option under the Services window and then select on the Properties option.
  6. Navigate to the Startup type field and set it as Automatic, if it was not already.
  7. Click on Apply and then on OK to save the changes.
  8. Lastly, restart the computer along with the printer. 
  9. Now, when both the devices turned on check whether the issue gets solved or not. Most of the users get a positive result using this solution.

Solution 2: Disable Use Printer Offline

A few of the times due to the technical issues the Use Printer Offline option gets active and thus returns the Printer Offline issue to the users. If this is the case or not, checking is the must. The steps for it, are as follows:

Canon mg3022 Offline

  1. At first, press the Windows button and the letter R altogether to open the Run bar.
  2. Next, in the Run bar type control and then hit on the OK button.
  3. After that, if the “View by” option of the Control Panel is set as “Category”, then click on the View devices and printers option, that you will get under the Hardware and Sound section.
  4. Under the Printers and Faxes section right-click on the Canon mg3022 printer and then click on See what’s printing. 
  5. Next, under the Printer tab ensure the checkbox beside “Use Printer Offline” is not active.
  6. Again under Printer, click on Cancel All Documents.
  7. Restart both the devices connected with the printer along with the printer, and then check whether the issue gets resolved or not.

Solution 3: Reinstall the Canon Software

After trying all the above solutions, if still, the Printer Offline issue exists then proceed to reinstall the printer driver on your PC. There is a chance that this solution will affect your case to fix the error. The steps are as follows:

  1. Press the Windows button to activate the search bar and then in the field type run.
  2. Next, click on the Run option from the searched result.
  3. In the Run bar type devmgmt.msc and then press the Enter button. This will opens the Device Manager on the computer screen.
  4. Navigate to the Print Queues option, under this you will get the Canon printer driver.
  5. Right-click on the Canon printer driver and then select the Uninstall option. Click on OK to confirm.
  6. Further, open a browser on your PC and using the browser open the Canon Official site.
  7. Get the printer driver according to the model you are using and then download that.
  8. Reinstall the printer driver.
  9. After reinstalling the printer driver restart both the devices and then check the printer condition. Hopefully, after the devices restart the problem will not there anymore.

That’s all are the effective solutions to resolve the Canon mg3022 offline error.

Procedure to Canon mg3500 Wireless Setup

Many access points (sometimes referred to as routers or hubs) feature an automatic Wi-Fi Protected Setup link button called “WPS.” It enables devices such as your PIXMA printer to connect to your network without entering a password and enables you to control the device from a nearby location quickly and easily.

Canon mg3500 Wireless Setup


This method is by far the easiest way to Canon mg3500 wireless setup, so please pick the WPS Connection Template for instructions on how to connect using this technique if you have a WPS button below in your access point.

If your access point does not support WPS, we have provided alternate connection instructions for your PIXMA printer, so please choose the Standard Connection Process as stated in this article.

Canon mg3500 Wireless Printer Setup via WPS Connection

To use the WPS push button process, certain conditions must be met. They are as follows:

  • The presence of the WPS push button is a must.
  • The network must use the WPA (Wi-Fi Protected Access) or WPA2 authentication protocol.

So, let us now begin.

  1. First of all, make sure that the printer is ON and then locate the WiFi button of the printer.
  2. Keep the WiFi button pressed until the orange color light blinks.
  3. After you left the WiFi button, look at the WiFi indicator, if it shows the blue color light. It indicates that the Network searching process is going on.

Else, if the blue color is not lit, and instead the orange Alarm is lit then proceed with the Troubleshooting button.

  1. Select the Network connection.
  2. Further, enter the password to confirm the internet connection.

That’s all.

Canon mg3500 Wireless Setup Using Standard Connection Process

The steps to proceed with to set up the Canon mg3500 wireless printer process is very simple. Just follow the below line steps.

  1. At first, turn on the printer and then load the a4 paper on the paper tray.
  2. Next, press and hold the Reset/ Cancel button till to the time the light flashes 15 times continuously. This will result in the network instructions page.
  3. After that, follow the printed instructions to connect the printer to the network.

Now, use the printer installation CD to complete the Canon mg3500 wireless setup process on Windows. 

However, if you are a Mac user then to install the driver you need to download the driver from the Canon official website by entering the printer model number according to the field on the website.

Guide to Perform the Canon mg2922 Setup

Canon Pixma mg2922 is a lightweight all-in-one color inkjet printer that is popular for home, office and personal use. It has an integrated Wifi networking that allows Google Cloud Printing. It’s also easier to set up cableless and can be achieved in just a few steps. This article will assist you with the Canon mg2922 setup process along with the solutions to the difficulties that the users are generally faced with.

Canon mg2922 Setup


Complete Method to Setup Canon mg2922 Wireless Printer

There are two distinct ways that the Canon MG2922 wireless setup process can effectively execute. You can learn them from the below lines. So, it is better to read both the methods first and then apply them to perform Canon mg2922 setup successfully.

Canon MG2922 Wireless Printer Setup Using The WPS Button

Proceed with the steps below:

  1. First of all, turn on the printer and then press the WiFi button and keep it held until the indicator flashes.
  2. After that, check the indicator color. If the color is blue then file or else you need to restart the printer.
  3. Next, get the access point and tap on the WPS button within 2 minutes.
  4. The blue light is blinking to indicates the WPS is searching the nearby networks. When the network list is on the control panel select your internet connection.
  5. Further, enter the network password to complete the setup process.
  6. Lastly, try to print a document using the printer to check whether the setup process is done successfully or not.

If you have faced an issue after trying the steps then check the last section below to know the solutions to the problem which you may be facing.

Canon MG2922 Wireless Setup Using The Standard Connection Process

Follow the steps below:

  1. On Windows computer, insert the Canon mg2922 wireless setup disk. However, if you are a Mac user then you need to download the printer software from the official Canon website or from the genuine Apple official website.
  2. Now, select the required field on the next window and then click on Next to proceed with the further step.
  3. Click on install helper and then hit on Next. Continue with the on-screen instructions to complete the printer wireless setup process.
  4. After that, proceed with the printer device. Ensure that the printer power button is ON and then choose the Next option to get the next window.
  5. Further, go to the Network section and then select the Cableless Setup option.
  6. Tap and hold the Wi-Fi button till to the time when the alarm flashes 2 times.
  7. After accepting the License User Agreement and going through the on-screen instructions click on Finish to end the task.

More Information:

  1. Ensure the Canon wireless printer and the related devices are in the ready state before starting the spooling program.
  2. Confirm the signal strength is OK. If any problem arises then fixing the problem beforehand of the printer setup process is important.
  3. The network must follow either WPA or else WPA2 methods for controlling the internet and the protocols. If there is an issue then the printer setup process will not be installed by following the above methods.

Solutions to the Canon MG2922 Setup Issues

Windows registry failure creates an issue while setting up the Canon mg2922 wireless printer. You can fix the problem by the use of the below steps:

  1. Go to the Control Panel window.
  2. From Control Panel navigate to Devices and Printers.
  3. Under the Printers and Faxes section right-click on the Canon mg2922 printer.
  4. After that, select the Run as administrator option.
  5. Further, under the Properties window, click on the Advanced tab.
  6. Next, select the New Driver button from the available tabs. Follow the on-screen instruction to install the driver option.

Hopefully, the steps will work well to fix the printer setup problem.